Dw series mesh belt drying equipment

Dw Series Mesh Belt Drying EquipmentDescription:Mesh Belt Drying Equipment is a continuous penetrating flow drying equipment applied for drying pieces strip and particles state materials with good ventilation. The machine is suitable for the materials such as dewatering vegetable, herbal medicine of Traditional Chinese medicine

Featured Products

Dw Series Mesh Belt Drying Equipment
Description:
Mesh Belt Drying Equipment is a continuous penetrating flow drying equipment applied for drying pieces strip and particles state materials with good ventilation. The machine is suitable for the materials such as dewatering vegetable, herbal medicine of Traditional Chinese medicine and others, for which the water contents are high and high drying temperature is not allowed. The machine owns the advantages, of fast drying speed, high evaporation capacity and good product quality. The de-watered & altered cake state paste material should be made into particles or strips before drying process.

Working Principle:
The materials are uniformly distributed on the mesh-belt by the material feeder. The mesh-belt generally adopts 12-60 mesh stainless steel mesh and it is drawn by a transmission device and move inside the dryer. The dryer is composed of several sections. For each section, the hot air is circulated separately. Part of exhausted gas is exhausted by a special moisture exhaust blower. The waste gas is controlled by an adjustment valve. The hot air passes through the mesh-belt covered with bring water material away. The mesh-belt moves slowly, running speed can be freely adjusted according to the material property. The final products after the drying process will fall into the material collector continuously. The top and low circulation units can be freely equipped according to the user's requirements. The number of section might be selected according to the production demands.

Characteristics:
1. Amount of air, heating temperature, time of material sticking on the belt and velocity of feeding material can be adjusted in order to obtain the best drying effect.
2. Equipments conjuration is very ¬flexible. It can use the netlike belt washing system and cooling raw material system.
3. Hot air can be circularly applied, the energy is greatly saved.
4. Unique air dividing device, it makes hot air distribute uniformly; this can guarantee products' quality.
5. Heating source can be selected from steam, conducting heat oil, electricity, and coal furnace and oil burner.

Application:
Dehydration vegetables, grain feed, monosodium glutamate, shredded coconut stuffing, organic pigments, synthetic rubber, acrylic fiber, medicines, medicinal herbs, wooden products, plastic products, electronic components aging, curing and so on.

Application Range:
Belt drier is used for mass production of continuous drying equipment for the drying of sheet, strip pellet material with better ventilation property, especially for the materials cannot bear high temperature such as dehydrated vegetables, Chinese herbal pieces of high moisture content. Belt driers have many advantages, such as fast drying rate, high evaporation strength, good product quality; cake type of paste materials, wet granulation can also be dried.

Technical Parameter:
type
DW-1.2-8
DW-1.2-10
DW-1.6-8
DW-1.6-10
DW-2-8
DW-2-10
unit number
4
5
4
5
4
5
belt width (m)
1.2
1.2
1.6
1.6
2
2
drying section length (m)
8
10
8
10
8
10
thickness of the material to be covered (mm)
10~80
temperature  (°C)
60~80
steam pressure (Mpa)
0.2~0.8
steam consumption (kg/h)
120~300
150~375
150~375
170~740
180~500
225~600
drying time (h)
0.2~1.2
0.25~1.5
0.2~1.2
0.25~1.5
0.2~1.2
0.25~1.5
drying strength kg H2O/H
60~160
80~220
75~220
95~250
100~260
120~300
total power of the blower (kw)
9.9
12.1
9.9
12.1
18.2
22.2
total power of the equipment (kw)
11.4
13.6
11.4
13.6
19.7
23.7

Company Information:


FAQ:
1.  Before you inquiry, you should let us know the following information:
A. >Name of the material to be dried?
B. > Shape of the material to be dried?
C. > Initial moister of material?
D. > Final moister of material?
E. > Drying materials can withstand the maximum temperature?
F. > Capacity of dried material? Kg/h (or capacity of inlet wet material? Kg/h)
G. > Equipment material, stainless steel or carbon steel?
H. > Using heating source, steam / electricity / coal / heat conduction oil or other?
2. Our usual price is based on FOB Shanghai, if you request CIF, please give us the delivery port, then we will give you CIF price.
3. Our usual payment term is: 30% TT in advance, 70%TT before shipment.

Dw Series Mesh Belt Drying EquipmentDw Series Mesh Belt Drying EquipmentDw Series Mesh Belt Drying EquipmentDw Series Mesh Belt Drying EquipmentDw Series Mesh Belt Drying EquipmentDw Series Mesh Belt Drying Equipment
Dw Series Mesh Belt Drying Equipment
Dw Series Mesh Belt Drying Equipment
Dw Series Mesh Belt Drying Equipment

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours