Shandong Shengrun Rubber Co.Ltd ( SR Belting ) is a manufacturer which has specialized in producing conveyor belt for more than 20 years. Products are used in mining, coal ,port, metallurgy, cement, transportation and hoisting of materials.
SR Belting always strives to assure the safety of conveyor belt to meet and exceed beyond the national standards and customers satisfactions with its products. SR Belting has obtained ISO9001,ISO24001 and ISO28001 certifications.
SR Belting manufactures conveyor belts based on customers' requirements as Global ISO, German DIN, SANS and RMA etc.
We have a independent design, research and development capabilities and can be customized to customer requirement.
Our company possesses a complete set of detection equipment, the independent chemical analysis and physical labs, ensuring all the raw materials to provide excellent quality products.
We sincerely welcome friends at home and abroad to visit our factory to discuss cooperation and agency business.
Our partners:CHINA SHENHUA, CNBM, SINOMA, LAFARGE, SHOUGANG GROUP, CHINA HUANENG 
EXPO:
Conveyor Belting Ultra Abrasion Resistant Conveyor Belt
e.g.EP200*4Ply, BW1200×(5+2) 25Mpa
Production description:
Conveyor belt is customized for handling of suger mill by Indonesia client, width is 1200mm, the quantity of canvas is 4 ply, with the wrap(length of the case) made of polyester(E) and the weave (transversal case fabric) made of nylon(P), impact and cutting strength > 50N/mm, tensile strength ≥25N/mm2, minimum break elongation is ≥ 400%, and the hardness is 60+/-5 shore a, top cover thickness is 5mm, the bottom cover thickness is 2mm, excellent abrasion resistance (loss from abrasion 50mm3 or less), with molded edges, adhension between fabric and fabric ≥ 5N/mm, adhension between fabric and rubber ≥ 4.5N/mm, continuous running temperature is up to 40ºC-80ºC.
Product construction:
Different materials and different causes of abrasion require different kinds of abrasion resistant covers.
Belt that transports some heavy or sharp materials such as rocks, glass that cut and gouge the surface of belt need different resistance properties. And our rubber compounds technic has been used to develop an outstanding range of abrasion resistance rubber covers.
NN belt is the combination of Nylon in warp and weft and it is widely used in multi-ply conveyor belts for transporting bulk or lumpy materials.
EP belt is the combination of Polyester in warp and Nylon in weft. EP belt provides far much lower elongation than NN belt and it can also be used for special purposes.
Classifications:
Cotton canvas (TC) conveyor belt:
The belt is traditional and suitable for short distance.
Nylon (NN) by conveyor belt:
Good flexibility, high strength, impact resistance, low elongation and be applicable to the long-distance higher capacity for high speed.
Polyester (EP) conveyor belt:
High modulus, low elongation for high speed.
NN conveyor belt:
•High tensile strength
•Excellent troughability
•High resistance against impact
•Strong adhesion and less ply separation
•Good accommodation to carrier roller and being well kept straight on
EP conveyor belt:
•Minimizing the moving distance of take-up
•High Modulus
•Excellent water resistance
•Suitable for long lines
Applications:
Specification:
Can be customized accroding to costomers' requirements.
Cover Grade:
•General Light Duty Service
Common References: DIN-Z is very economical for moderately abrasive to conveyor small size materials.
•Medium Abrasion Resistance
Common Reference: DIN-Y, DIN-N, RMA 2, AS-N are for moderate abrasion resistance applications, mostly
above ground. Regularly used for transportation of Coal, crushed ores, limestone, sand, cements etc.
•High Abrasion Resistance
Common Reference: DIN-X, DIN-M, RMA1, AS-M are excellent abrasion resistance against cutting, impact,
heavy rocks, sharp stones.
•Super Abrasion Resistance
Common Reference: DIN-W is used in extremely abrasive applications such as Copper & ore, sinter, coke. It
provides high resistance without increasing cover thickness and weight of the belt. 
Other belts we offer:
| 1)Multiply Fabric Conveyor Belt | 7)Pipe Conveyor Belt |
| 2)Steel Cord Conveyor Belt | 8)Chevron Conveyor Belt |
| 3)Heat Resistant Conveyor Belt | 9)Elevator Conveyor Belt |
| 4)Anti-Burning Conveyor Belt | 10)Oil and Fat Resistant Conveyor Belt |
| 5)Flame Resistant Conveyor Belt | 11)Aramid Conveyor Belt |
| 6)Corrugated Sidewall Conveyor Belt | 12)Light Duty Conveyor Belt |
Our packing:
There is a variety of packing solutions we can offer, and also be customized according to your requirements.
SR Belting Business FAQ
Q:What is your production capacity?
A:SR Belting has 11 production lines and its capacity is 5000meters per day.
Q:How about your lead time?
A: It is 20 ~ 25days for regular belts.
Q: What is your M.O.Q ?
A: M.O.Q is 1*20GP. The less quantity is ok but its cost will be higher.
Q: Do you have belt warranty?
A: At least 12months service life for regular belt. HR T4+ belt 3~6month.
Q: What certificates do you have ?
A: SR Belting has obtained ISO9001,ISO24001 and ISO28001 certifications.